PVC Coated Galvanized Mesh For Solar Panel solar panel pigeon proofing mesh
PVC Coated Galvanized Mesh For Solar Panel solar panel pigeon proofing mesh
Short Description:
HERE ARE SOME OF THE MAIN REASONS WHY BIRD CONTROL IS IMPORTANT:
- Birds, bird droppings and nesting materials carry transmittable diseases and ectoparasites.
- Bird droppings are highly acidic and can stain and corrode building materials.
- Birds can contaminate food production and inventory when they nest in warehouses.
- Regular cleanup of bird droppings can cost businesses thousands of dollars every year.
- Bird nests can clog drains and pose a fire risk near lighting or other features.
- Bird droppings can be a liability by creating a slip and fall risk.
Install Instruction:
A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge. It may
be necessary to use more clips where mesh panels overlap. The clips should be placed every 18 inches. The mesh is usually in 8 inches wide rolls and comes in
100 feet lengths.
Step 1: Wear protective gloves when handling and cutting the mesh. Cut the roll into 1.6 M sections (or length of the longest side of a panel), it is much easier to
work with shorter lengths. Bend up two to three squares of the mesh to about a 45 degree angle . This helps to lock the mesh snugly to the roof, this can easily be
done over flat edge by hand.
Step 2: Place clips every 450mm / 18 inches along outer edge of PV array. Slide the clip onto the underside edge of the panel support bracket. Slide as far
outward as possible so the clip is all the way on the lip of the panel.
Step 3: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward
pressure on the screen, pushing it towards the roof.
Step 4: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten speed washer to
panel edge and add the lock nut.
Step 5: Cut off any excess mesh screen sticking over the top edge of the solar panel array. Cut of the clip assembly rod flush with the
exterior of the speed washer. Use metal shears or our professional wire cutters.
Advantages of Product:
1:Fast and easy to install, no gluing or drilling
necessary.
2:It does not void warranties and can be removed
for servicing.
3:Non-invasive installation method that neither
pierces the
solar panel nor the roof covering
4:It is better than using spikes or repellent
gels,100% effective when properly installed
5: long-lasting, durable, non-corrosive
6:Reduce the cleaning and maintenance
requirements for solar panels
7:It is specifically designed and intended for use in
excluding all species of birds from roosting
and nesting solar panel arrays
Our Advantages
Stock in large quantities
The reason why we can provide better service is that as an industry and trade company, we maintain a large inventory, which
significantly shortens the delivery time.
MOQ
The minimum order quantity we require is 50. However, if your order quantity falls short of this requirement, please feel free to
contact me. I will be glad to offer alternative solutions tailored specifically to address this issue.
Flexible customization
The entirety of our product range is customizable, including the option to sell the net volume with various types and quantities
of clips. If you require product parameters that differ from those stated above, please do not hesitate to contact me immediately.
I will ensure a satisfactory solution is provided.
