Factory For Pigeon Problems Under Solar Panels - Bird Barrier Solar Panel Pigeon Proofing Kit to Protect Solar Panels from Rodents, Squirrel – Tengfei

Description
One roll of 8” x 100ft, 6”*100ft, Good quality PVC Coated galvanized mesh fit for proofing around solar panels which can be bent or cut to size.
Hole size: 12.5mm x 12.5mm
Includes:
1. UV Stable specialist clips.
2. cable ties
3.  Snips.
Keeps pigeons and pests away from under the solar panels effective when installed properly. 1/2″ wire mesh offers an effective long lasting exclusion screen where other products might fail. It can be bent into custom shapes and glued or screwed in place.
Installation guidance

The wire mesh is supplied in rolls. The preferred technique is to cut it into six-foot lengths and straighten before getting onto the roof. Then, using a length of 2” X 4” timber, bend up the bottom inch of mesh to about 30 degrees. This “kick-out” helps to lock the mesh firmly into place. We install our Pigeon Guard (Black PVC Coated Galvanized Welded Wire Mesh) with specialized non impacting fasteners. This ensures you’ll never have any Pigeons and or critters ever living under your solar panels!
A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge. See the diagram attached to this product listing for more details and an example of a typical installation.
● Patent-pending plastic clips are UV-stable, won’t scratch panels
● Clips recommended every 18 inches
● The lips bind the mesh to the panels without drilling holes or damaging the system
● Nearly invisible from the ground
● Tin snips and other basic tools required for installation

This non-penetrating system is fast and easy to install, does not void warranties and can be removed for servicing. These arrays provide perfect harborage for birds and other critters, and homeowners are desperate for a solution.